Tag Archives: 120v

bosch

Bosch RH850VC SDS Max Rotary Hammer 1-7/8 13.5Amp 120V

Bosch RH850VC SDS Max Rotary Hammer 1-7/8 13.5Amp 120V
Bosch RH850VC SDS Max Rotary Hammer 1-7/8 13.5Amp 120V

Bosch RH850VC SDS Max Rotary Hammer 1-7/8 13.5Amp 120V
Bosch RH850VC SDS Max Rotary Hammer 1-7/8 13.5Amp 120V. I bought this factory reconditioned, used it once, and it has sit in my garage for a few years, so time to sell it. It works great, and is quite powerful. See Bosch site for all technical details. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “broeren_rob” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.
  • UPC: 0000346450781
  • Brand: Bosch
  • Model: Corded
  • MPN: RH850VC

Bosch RH850VC SDS Max Rotary Hammer 1-7/8 13.5Amp 120V
bosch

Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case

Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case

Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with a hard case. Good working condition fully tested! Please check the pictures carefully. I don’t clean to make pretty I just make sure they work properly for a good satisfaction customer! This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “ponchoh-74″ and is located in this country: US. This item can be shipped to United States.
  • Brand: Bosch
  • Custom Bundle: No
  • MPN: 11264EVS
  • Bit Size: 4-1/8 in.
  • Country/Region of Manufacture: Germany
  • Modified Item: No

Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
bosch

Bosch RH850VC 120V 1-7/8 SDS-max Heavy Duty Rotary Hammer

Bosch RH850VC 120V 1-7/8 SDS-max Heavy Duty Rotary Hammer
Bosch RH850VC 120V 1-7/8 SDS-max Heavy Duty Rotary Hammer
Bosch RH850VC 120V 1-7/8 SDS-max Heavy Duty Rotary Hammer
Bosch RH850VC 120V 1-7/8 SDS-max Heavy Duty Rotary Hammer
Bosch RH850VC 120V 1-7/8 SDS-max Heavy Duty Rotary Hammer
Bosch RH850VC 120V 1-7/8 SDS-max Heavy Duty Rotary Hammer

Bosch RH850VC 120V 1-7/8 SDS-max Heavy Duty Rotary Hammer
Powerful 14.5-amp motor – delivers 9.3 Ft. Of impact energy in a 20-Lbs. Vibration Control – for all day jobs, tool allows for maximum user comfort. Dual-mode selector – two modes of operation, rotary hammer and hammer-only mode. Constant Response circuitry – for soft-start, constant speed under load and overload protection. Electro-pneumatic impact system – maximizes impact force and minimizes vibration. SDS-max® bit system – tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. Variable-speed dial – for accurate bit starting and controlled chipping applications. Padded rear handle – absorbs shock for operator comfort. Integral clutch – helps minimize torque reaction. Turbo Power feature – 20 percent power boost in hammer-only mode. What’s in The Box. RH850VC SDS-max 1-7/8 In. 30 Day Satisfaction Guaranteed. Impact Energy measured based on EPTA guidelines. Dust Extraction/Collection Hood HDC200, HDC250, HDC300 SDS-max® Hammer Adapter for SDS-plus® Accessories HA1030 SDS-max® Hammer Adapter for Spline Accessories HA1031 SDS-max® Hammer Adapter for 1/2-20 Thread Accessories HA1032. Secure & hassle-free shopping. All our sales are backed by a 30-day satisfaction guarantee. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “factory_authorized_outlet” and is located in this country: US. This item can be shipped to United States, Canada, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
  • Battery Included: F
  • EAN: 000346426571
  • Length: 25
  • Width: 17
  • Height: 6
  • Item Length: 25
  • Item Width: 17
  • Item Height: 6
  • UPC: 0000346450781
  • Brand: Bosch
  • Model: Corded
  • MPN: RH850VC

Bosch RH850VC 120V 1-7/8 SDS-max Heavy Duty Rotary Hammer
bosch

Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case

Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case

Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
Tool works great, shows some wear. Comes with the Hard Case only. WHAT EVER IS SHOWN IN THE PICTURES IS WHAT YOU WILL RECEIVE, IF ITS NOT IN THE PHOTOS ITS NOT INCLUDED! The item you receive we be in the same condition as stated. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “rwademan” and is located in this country: US. This item can be shipped to United States.
  • Brand: Bosch
  • Custom Bundle: No
  • MPN: 11264EVS
  • Bit Size: 4-1/8 in.
  • Country/Region of Manufacture: Germany
  • Modified Item: No

Bosch 11264EVS Rotary Hammer 1-5/8 In. 13Amp 120V with Hard Case
bosch

BOSCH 11264EVS SDS Max Rotary Hammer, 13A @ 120V

BOSCH 11264EVS SDS Max Rotary Hammer, 13A @ 120V
BOSCH 11264EVS SDS Max Rotary Hammer, 13A @ 120V

BOSCH 11264EVS SDS Max Rotary Hammer, 13A @ 120V
Rotary Hammer Kit, Chuck Style SDS-Max, Handle Type L-Shape, Solid Bit Optimal Drilling Range in Concrete 0 in to 1 5/8 in, Solid Bit Capacity in Concrete 1 5/8 in, Modes of Operation Hammer and Rotate, Hammer Only, Kit Contents (1) Bare Tool, Current 13 A, Voltage 120V AC, Maximum Blows per Minute 2,900 bpm, Impact Energy 6.5 ft-lb, Anti-Kickback Clutch Yes, Auxiliary Handle Positions Continuous, Blows per Minute 1,700 to 2,900 bpm, Clutch Style Integral Clutch, Cord Length 12 ft. Hammer features a powerful 13.0-AMP motor and has a dual-mode selector for combination versatility – rotary hammer or hammer-only mode. Providing 6.5 ft. Of impact energy, the tool weighs only 15.2 lbs. For a top performance-to-weight ratio. The hammer has integral clutch that helps to minimize torque reaction. Concrete contractors will appreciate the production in drilling and chiseling applications. The hammer’s 12-position Vario-Lock(TM) helps to optimize chiseling angles. Bosch’s Vibration Control(TM) in the hammer mechanism and grip area provide improved user comfort. And with Constant Response(TM) circuitry, users benefit from smooth starts and constant load under pressure. Grainger Part #:4GAE3. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • Brand: BOSCH
  • MPN: 11264EVS
  • Model: 11264EVS
  • UPC: 000346383843

BOSCH 11264EVS SDS Max Rotary Hammer, 13A @ 120V
bosch

Bosch RH1255VC 120V 2 Corded SDS-max Heavy Duty Rotary Hammer

Bosch RH1255VC 120V 2 Corded SDS-max Heavy Duty Rotary Hammer
Bosch RH1255VC 120V 2 Corded SDS-max Heavy Duty Rotary Hammer

Bosch RH1255VC 120V 2 Corded SDS-max Heavy Duty Rotary Hammer
Turbo Power for torque and speed boost in hammer mode. Best power-to-weight ratio of 14.1 Ft. Outstanding power in a 2 In. Vibration Control for comfort in all-day applications. Constant Response for soft start, constant speed under load. Vario-Lock positioning for precise chiseling location. Weighs under 27 Lbs. Multiple drilling speeds to match speed to application. What’s in The Box. RH1255VC SDS-max 2 In. 30 Day Satisfaction Guaranteed. Impact Energy measured based on EPTA guidelines. Dust Extraction/Collection Hoods HDC200, HDC250, HDC300 SDS-max® Hammer Adapter for SDS-plus® Accessories HA1030 SDS-max® Hammer Adapter for Spline Accessories HA1031 SDS-max® Hammer Adapter for 1/2-20 Thread Accessories HA1032. Secure & hassle-free shopping. All our sales are backed by a 30-day satisfaction guarantee. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “factory_authorized_outlet” and is located in this country: US. This item can be shipped to United States, Canada, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
  • Battery Included: F
  • EAN: 000346480702
  • Length: 27
  • Width: 20
  • Height: 6
  • Item Length: 27
  • Item Width: 20
  • Item Height: 6
  • UPC: 0000346480702
  • Brand: Bosch
  • Model: RH1255VC
  • MPN: RH1255VC

Bosch RH1255VC 120V 2 Corded SDS-max Heavy Duty Rotary Hammer
bosch

BOSCH 11265EVS Spline Rotary Hammer, 13A @ 120V

BOSCH 11265EVS Spline Rotary Hammer, 13A @ 120V
BOSCH 11265EVS Spline Rotary Hammer, 13A @ 120V

BOSCH 11265EVS Spline Rotary Hammer, 13A @ 120V
Rotary Hammer Kit, Chuck Style Spline, Handle Type L-Shape, Solid Bit Optimal Drilling Range in Concrete 0 in to 1 5/8 in, Solid Bit Capacity in Concrete 1 5/8 in, Modes of Operation Hammer and Rotate, Hammer Only, Kit Contents (1) Bare Tool, Current 13 A, Voltage 120V AC, Maximum Blows per Minute 2,900 bpm, Impact Energy 6.5 ft-lb, Anti-Kickback Clutch Yes, Auxiliary Handle Positions Continuous, Blows per Minute 1,700 to 2,900 bpm, Clutch Style Integral Clutch, Cord Length 12 ft. Hammer features a powerful 13.0-amp motor and has a dual-mode selector for combination versatility – rotary hammer or hammer-only mode. Concrete contractors will appreciate the production in drilling and chiseling applications. Providing 6.5 ft. Of impact energy, the tool weighs only 15.1 lbs. For a top performance-to-weight ratio. Constant Response(TM) circuitry allows for smooth starts and constant load under pressure, and an integral clutch helps to minimize adverse torque reaction. The hammer’s 12-position Vario-Lock(TM) helps to optimize chiseling angles. Bosch’s Vibration Control(TM) in the hammer mechanism and grip area provide improved user comfort. The Auto-Max(TM) variable-speed dial allows users to adjust tool settings based on the application and material they’re tackling. The hammer has a Service Minder(TM) light indicating when preventative maintenance is needed. Grainger Part #:4GAE4. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • Brand: BOSCH
  • MPN: 11265EVS
  • Model: 11265EVS
  • UPC: 000346383850
  • EAN: 0000346383850

BOSCH 11265EVS Spline Rotary Hammer, 13A @ 120V
bosch

BOSCH RH540M SDS Max Combination Hammer, 12A @ 120V

BOSCH RH540M SDS Max Combination Hammer, 12A @ 120V
BOSCH RH540M SDS Max Combination Hammer, 12A @ 120V

BOSCH RH540M SDS Max Combination Hammer, 12A @ 120V
Rotary Hammer Kit, Chuck Style SDS-Max, Handle Type L-Shape, Solid Bit Optimal Drilling Range in Concrete 1/2 in to 1 3/8 in, Solid Bit Capacity in Concrete 1 9/16 in, Modes of Operation Hammer and Rotate, Hammer Only, Kit Contents (1) Bare Tool, Current 12 A, Voltage 120V AC, Maximum Blows per Minute 2,900 bpm, Impact Energy 6.1 ft-lb, Anti-Kickback Clutch Yes, Auxiliary Handle Positions Continuous, Blows per Minute 1,500 to 2,900 bpm, Clutch Style Integral Clutch, Cord Length 8 ft. The Bosch SDS-max(R) Combination Hammer is a combo rotary hammer and hammer-only tool designed for concrete contractors and professional remodelers who need a powerful and versatile tool. It delivers 6.1 ft. Of impact energy while weighing in at only 15.2 Lbs. The motor is rated at 170 to 340 RPM in rotary mode and 1,200 to 2,750 BPM in hammer mode, which will easily reduce concrete to dust. Its SDS-max(R) bit system allows tool-free and one-handed bit changes. The Vario-Lock(TM) mechanism lets users angle the chisel into 12 different positions to optimize the working angle. The hammer has a Dual Mode Selector Knob and service minder brushes, which clearly indicate when preventive maintenance is required. Grainger Part #:30RW21. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • Brand: BOSCH
  • MPN: RH540M
  • Model: RH540M
  • UPC: 000346456127
  • EAN: 0000346456127

BOSCH RH540M SDS Max Combination Hammer, 12A @ 120V
bosch

BOSCH RH1255VC SDS Rotary Hammer, 120V, Keyless, 26.2 lb

BOSCH RH1255VC SDS Rotary Hammer, 120V, Keyless, 26.2 lb
BOSCH RH1255VC SDS Rotary Hammer, 120V, Keyless, 26.2 lb

BOSCH RH1255VC SDS Rotary Hammer, 120V, Keyless, 26.2 lb
SDS Rotary Hammer, 120V, Keyless, 26.2 lb. Rotary Hammer Kit, Chuck Style SDS-Max, Handle Type L-Shape, Solid Bit Optimal Drilling Range in Concrete 0 in to 2 in, Solid Bit Capacity in Concrete 2 in, Modes of Operation Hammer and Rotate, Hammer Only, Kit Contents (1) Bare Tool, Current 15 A, Voltage 120V AC, Maximum Blows per Minute 2,150 bpm, Impact Energy 14.1 ft-lb, Anti-Kickback Clutch No, Auxiliary Handle Positions Continuous, Blows per Minute 1,000 to 2,150 bpm, Clutch Style Slip Clutch, Cord Length 8 ft. Grainger Part #:48XY46. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • Brand: BOSCH
  • MPN: RH1255VC
  • Model: RH1255VC
  • UPC: 000346480702

BOSCH RH1255VC SDS Rotary Hammer, 120V, Keyless, 26.2 lb
bosch

BOSCH RH850VC SDS Max Rotary Hammer, 13.5A @ 120V

BOSCH RH850VC SDS Max Rotary Hammer, 13.5A @ 120V
BOSCH RH850VC SDS Max Rotary Hammer, 13.5A @ 120V

BOSCH RH850VC SDS Max Rotary Hammer, 13.5A @ 120V
Rotary Hammer Kit, Chuck Style SDS-Max, Handle Type D-Handle, Solid Bit Optimal Drilling Range in Concrete 0 in to 1 7/8 in, Solid Bit Capacity in Concrete 1 7/8 in, Modes of Operation Hammer and Rotate, Hammer Only, Kit Contents (1) Bare Tool, Current 14.5 A, Voltage 120V AC, Maximum Blows per Minute 2,750 bpm, Impact Energy 9.3 ft-lb, Anti-Kickback Clutch Yes, Auxiliary Handle Positions Continuous, Blows per Minute 1,380 to 2,750 bpm, Clutch Style Integral Clutch, Cord Length 12 ft. This SDS Max(R) rotary hammer kit is engineered to offer performance and reliability in both drilling and chiseling applications. It offers active vibration reduction to help avoid muscle fatigue. It also features a long air cushion, a tuned mass damper, and decoupled main handle for added comfort and safety. ¢ Active vibration reductionâ? ¢ Long air cushionâ? ¢ Tuned mass damperâ? ¢ Decoupled main handle. Grainger Part #:21TY29. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • UPC: 0000346450781
  • EAN: 0000346450781
  • Brand: Bosch
  • Model: Corded
  • MPN: RH850VC

BOSCH RH850VC SDS Max Rotary Hammer, 13.5A @ 120V