Monthly Archives: November 2022

bosch

BOSCH RH850VC SDS Max Rotary Hammer, 13.5A @ 120V

BOSCH RH850VC SDS Max Rotary Hammer, 13.5A @ 120V
BOSCH RH850VC SDS Max Rotary Hammer, 13.5A @ 120V

BOSCH RH850VC SDS Max Rotary Hammer, 13.5A @ 120V
Rotary Hammer Kit, Chuck Style SDS-Max, Handle Type D-Handle, Solid Bit Optimal Drilling Range in Concrete 0 in to 1 7/8 in, Solid Bit Capacity in Concrete 1 7/8 in, Modes of Operation Hammer and Rotate, Hammer Only, Kit Contents (1) Bare Tool, Current 14.5 A, Voltage 120V AC, Maximum Blows per Minute 2,750 bpm, Impact Energy 9.3 ft-lb, Anti-Kickback Clutch Yes, Auxiliary Handle Positions Continuous, Blows per Minute 1,380 to 2,750 bpm, Clutch Style Integral Clutch, Cord Length 12 ft. This SDS Max(R) rotary hammer kit is engineered to offer performance and reliability in both drilling and chiseling applications. It offers active vibration reduction to help avoid muscle fatigue. It also features a long air cushion, a tuned mass damper, and decoupled main handle for added comfort and safety. ¢ Active vibration reductionâ? ¢ Long air cushionâ? ¢ Tuned mass damperâ? ¢ Decoupled main handle. Grainger Part #:21TY29. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • UPC: 0000346450781
  • EAN: 0000346450781
  • Brand: Bosch
  • Model: Corded
  • MPN: RH850VC

BOSCH RH850VC SDS Max Rotary Hammer, 13.5A @ 120V
bosch

Bosch GBH2-28L SDS Plus Bulldog Xtreme Max 8.5 Amp 1-1/8 Inch Rotary Hammer Kit

Bosch GBH2-28L SDS Plus Bulldog Xtreme Max 8.5 Amp 1-1/8 Inch Rotary Hammer Kit
Bosch GBH2-28L SDS Plus Bulldog Xtreme Max 8.5 Amp 1-1/8 Inch Rotary Hammer Kit
Bosch GBH2-28L SDS Plus Bulldog Xtreme Max 8.5 Amp 1-1/8 Inch Rotary Hammer Kit
Bosch GBH2-28L SDS Plus Bulldog Xtreme Max 8.5 Amp 1-1/8 Inch Rotary Hammer Kit
Bosch GBH2-28L SDS Plus Bulldog Xtreme Max 8.5 Amp 1-1/8 Inch Rotary Hammer Kit
Bosch GBH2-28L SDS Plus Bulldog Xtreme Max 8.5 Amp 1-1/8 Inch Rotary Hammer Kit

Bosch GBH2-28L SDS Plus Bulldog Xtreme Max 8.5 Amp 1-1/8 Inch Rotary Hammer Kit
Item is new open box. Item does not have original box. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “finertime” and is located in this country: US. This item can be shipped to United States.
  • Type: Rotary Hammer
  • Manufacturer Color: Blue
  • Handle Material: Plastic
  • Item Weight: 6.90 pounds
  • Item Length: 17.40 inches
  • Item Height: 8.5 inches
  • Country/Region of Manufacture: Mexico
  • Color: Blue
  • Item Width: 3.5 inches
  • UPC: 0000346489033
  • Brand: Bosch
  • Model: BSHNGBH228L
  • MPN: GBH228L

Bosch GBH2-28L SDS Plus Bulldog Xtreme Max 8.5 Amp 1-1/8 Inch Rotary Hammer Kit
bosch

Bosch 2 Pack Of Genuine OEM Replacement Motors # 2609199313-2PK

Bosch 2 Pack Of Genuine OEM Replacement Motors # 2609199313-2PK

Bosch 2 Pack Of Genuine OEM Replacement Motors # 2609199313-2PK
Genuine OEM Replacement Part # 2609199313-2PK. Consult owners manual for proper part number identification and proper installation. Please refer to list for compatibility. Bosch 2 Pack Of Genuine OEM Replacement Motors # 2609199313-2PK. Includes (2) 2609199313 Motors. Compatible with the following: Bosch models: 25618-01 Lithe on Impactor Driver, 25618 Lithium-Ion Impactor Driver. Signature Confirmation required to P. Boxes and APO’s. We will make every effort to correct the situation. We are Authorized Distributors, our products carry full manufacturers warranties (applicable to all NEW items). This will be clearly stated on the listing. Tool Supply Direct 34490 Melinz Parkway Eastlake OH 44095. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “toolsupplydirect” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
  • Brand: Bosch
  • MPN: 2609199313-2PK
  • Model: 2609199313
  • Item Type: Product
  • Battery Included: No
  • Battery Technology: Lithium
  • Compatible Brand: Bosch
  • UPC: 704660009631

Bosch 2 Pack Of Genuine OEM Replacement Motors # 2609199313-2PK
bosch

Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Corded SDS-Plus Rotary Hammer

Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Corded SDS-Plus Rotary Hammer
Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Corded SDS-Plus Rotary Hammer
Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Corded SDS-Plus Rotary Hammer

Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Corded SDS-Plus Rotary Hammer
Up for sale is a Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Corded SDS-Plus Rotary Hammer. This is a New item in the package it was only opened to verify contents. Please feel free to ask any questions I check my messages frequently. Please check out my other Awesome Auctions!!!!!!!!!!!!! This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “trade4cash831″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.
  • Bit Size: 1\
  • UPC: 0000346345599
  • Brand: Bosch
  • Model: Bulldog
  • MPN: 11255VSR

Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Corded SDS-Plus Rotary Hammer
bosch

Bosch RH328VC 36K Cordless Bulldog 1 1/8 Hammer Impact Drill 36V

Bosch RH328VC 36K Cordless Bulldog 1 1/8 Hammer Impact Drill 36V
Bosch RH328VC 36K Cordless Bulldog 1 1/8 Hammer Impact Drill 36V
Bosch RH328VC 36K Cordless Bulldog 1 1/8 Hammer Impact Drill 36V
Bosch RH328VC 36K Cordless Bulldog 1 1/8 Hammer Impact Drill 36V
Bosch RH328VC 36K Cordless Bulldog 1 1/8 Hammer Impact Drill 36V

Bosch RH328VC 36K Cordless Bulldog 1 1/8 Hammer Impact Drill 36V
Bosch RH328VC 36K Cordless Bulldog 1 1/8 Hammer Impact Drill 36V. Rarely used in excellent condition. It comes with 2 batteries 1 handle. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “nicodin13″ and is located in this country: US. This item can be shipped to United States.
  • Bit Size: 1 1/8\
  • UPC: 0000346471069
  • Brand: Bosch
  • Model: RH328VC-36K
  • MPN: RH328VC36K

Bosch RH328VC 36K Cordless Bulldog 1 1/8 Hammer Impact Drill 36V
bosch

BOSCH GDE18V-16 Dust Extraction Attachment, 1-13/64 ft. L

BOSCH GDE18V-16 Dust Extraction Attachment, 1-13/64 ft. L
BOSCH GDE18V-16 Dust Extraction Attachment, 1-13/64 ft. L

BOSCH GDE18V-16 Dust Extraction Attachment, 1-13/64 ft. L
Dust Extraction Attachment, 1-13/64 ft. Grainger Part #:423N69. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • Brand: BOSCH
  • MPN: GDE18V-16
  • Model: GDE18V-16
  • UPC: 000346489316

BOSCH GDE18V-16 Dust Extraction Attachment, 1-13/64 ft. L
bosch

BOSCH HS1826 Chisel Bit, Point, 4.5in

BOSCH HS1826 Chisel Bit, Point, 4.5in
BOSCH HS1826 Chisel Bit, Point, 4.5in

BOSCH HS1826 Chisel Bit, Point, 4.5in
Chisel Bit, Point, 4.5in. Chisel for Spline Tool, Chisel Type Pointed Spade, Shank Type – Machining Hex, Shank Diameter 3/4 in, Shank Hex Size 3/4 in, Measurement System Fractional Inch, Head Width 4 1/2 in, Overall Length 16 in, Chisel Collar Shape Point, For Tool Type Rotary Drill. Grainger Part #:2LDK9. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “grainger” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Japan, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Sri Lanka, Luxembourg, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
  • Brand: BOSCH
  • MPN: HS1826
  • Model: HS1826
  • UPC: 000346245547

BOSCH HS1826 Chisel Bit, Point, 4.5in
bosch

Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Inch SDS Plus D-Handle Rotary Hammer Drill

Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Inch SDS Plus D-Handle Rotary Hammer Drill
Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Inch SDS Plus D-Handle Rotary Hammer Drill
Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Inch SDS Plus D-Handle Rotary Hammer Drill
Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Inch SDS Plus D-Handle Rotary Hammer Drill
Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Inch SDS Plus D-Handle Rotary Hammer Drill
Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Inch SDS Plus D-Handle Rotary Hammer Drill

Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Inch SDS Plus D-Handle Rotary Hammer Drill
Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Inch SDS Plus D-Handle Rotary Hammer Drill. Comes with the hammer drill, three bits, and a hard case. The drill was tested and it is in working condition. We have been in business for over 31 years in the same location in Woodbridge, Virginia. We have over 5200 square feet of merchandise and always are getting in new, fabulous jewelry and merchandise! Should you have any questions or concerns we will be happy to address them. We are willing to work out any problems or concerns you have. We just ask that you give us a chance to make corrections if needed prior to leaving feedback. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “usawoodbridge2010″ and is located in this country: US. This item can be shipped to United States.
  • Height: 0
  • Length: 0
  • Manufacturer: BOSCH
  • Serial Number: 0611276010
  • Weight: 0
  • Width: 0
  • EAN: 0000346345599
  • Brand: Bosch
  • Model: Bulldog
  • MPN: 11255VSR

Bosch 11255VSR Bulldog Xtreme 8 Amp 1 Inch SDS Plus D-Handle Rotary Hammer Drill
bosch

BOSCH 11255VSR SDS-Plus Rotary Hamr Drill Kit, 7.5A@120V

BOSCH 11255VSR SDS-Plus Rotary Hamr Drill Kit, 7.5A@120V
BOSCH 11255VSR SDS-Plus Rotary Hamr Drill Kit, 7.5A@120V

BOSCH 11255VSR SDS-Plus Rotary Hamr Drill Kit, 7.5A@120V
Rotary Hammer Kit, Chuck Style SDS-Plus, Handle Type D-Handle, Solid Bit Optimal Drilling Range in Concrete 3/16 in to 5/8 in, Solid Bit Capacity in Concrete 1 in, Modes of Operation Hammer and Rotate, Hammer Only, Rotate Only, Kit Contents (1) Bare Tool, Current 8 A, Voltage 120V AC, Maximum Blows per Minute 5,800 bpm, Impact Energy 2.0 ft-lb, Anti-Kickback Clutch Yes, Auxiliary Handle Positions Continuous, Blows per Minute 0 to 5,800 bpm, Clutch Style Integral Clutch, Cord Length 13 ft. Multi-function selector has three modes of operation: rotary hammer, hammer-only and rotation-only mode. Vario-lock(TM) positioning rotates and locks chisel into 36 different positions to optimize working angle. The innovative rotating brush plate provides equal power in forward and reverse. Cord turret has a 35-degree pivot for added flexibility and longer cord life. SDS-plus(R) bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. Variable-speed reversing trigger for accurate bit starting as well as removing fasteners or bound bits. Integral clutch helps minimize torque reaction. Includes a comfortable D-handle grip design for greater control, especially when drilling overhead or downward. Grainger Part #:2LDB3. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • Brand: BOSCH
  • MPN: 11255VSR
  • Model: 11255VSR
  • UPC: 000346345599
  • EAN: 0000346345599

BOSCH 11255VSR SDS-Plus Rotary Hamr Drill Kit, 7.5A@120V
best

Best Hammer Drill Brand Milwaukee Dewalt Makita Ryobi Hart U0026 Cacoop